About Cookies

We use cookies to help make this website better and to improve our service. Learn more about our use of cookies by clicking here.

Continue

Nufins

Cementitious Repair & Paving

Pre-packed polymer modified cementitous concrete repair mortar for the reinstatement of defective concrete.

Products displayed with are environmentally friendly.

  • blank
  • Product
  • Description
  • PAck Size
  • Coverage/Yield
  • TDS
  • Brochure

Products

Description

POLYMER MODIFIED CEMENTITIOUS CONCRETE REPAIR MORTAR characterised by its high early strength development and rapid moisture loss. The material has been designed to comply with the requirements of the HA standard BD27/86 Clause 6 and is an ideal material for the repair of bridge decks and suspended slabs prior to waterproofing.

PAck Size

  • 25Kg

Coverage/Yield

12.5L

Description

HIGH STRENGTH >40N/mm² MEDIUM BUILD LIGHTWEIGHT FIBRE REINFORCED MORTAR. Polymer modified cementitious mortar which requires the addition of clean water. The product is characterised by it's excellent bond strength and high abrasion resistance, making it ideal for patching or rendering; up to 50mm on vertical surfaces and up to 30mm overhead. Complies with HA specification BD 27/86 Clause 6.

PAck Size

  • 22Kg

Coverage/Yield

14L

Description

HIGH BUILD LIGHTWEIGHT FIBRE REINFORCED MORTAR designed for the repair and restoration of spalled or damaged concrete in the inverted and vertical plane. A prepacked material containing an SBR or Acrylic gauging liquid to improve bonding and waterproofing properties of the mortar. Complies with HA specification BD 27/86 Clause 6. Tested by Taywood.

PAck Size

  • 20Kg

Coverage/Yield

14L

Description

Prepacked CEMENTITIOUS MORTAR for the repair of sections between 10mm - 30mm mainly in the horizontal plane. Available with either an SBR or Acrylic gauging liquid as required. Guaranteed low W/C ratio. Complies with the requirements of HA specification BD27/86 Clause 6.

PAck Size

  • 27.5Kg

Coverage/Yield

13L

Description

Similar to Nucem Mortar but containing a large granotype aggregate FOR SECTIONS GREATER THAN 25mm. Available with either an SBR or Acrylic gauging liquid as required. Complies with the requirements of HA standard BD27/86 Clause 6.

PAck Size

  • 27.5Kg

Coverage/Yield

12L

Description

Water dispersed CEMENTITIOUS EPOXY PRIMER TACK COAT for use with Acropak HB40 Mortar, Nucem HB Mortar, Nucem Mortar and Nucem Concrete. Also recommended for use when bonding fresh concrete to existing concrete.

PAck Size

  • 1Kg
  • 5Kg

Coverage/Yield

3 - 5m² per Kg

Description

Single Pack ACRYLIC, READY-TO-USE PRIMER, for application with Nucem or Acropak products or as a general bonding primer.

PAck Size

  • 5L
  • 25L

Coverage/Yield

5 - 8m² per Litre

Description

POLYMER MODIFIED CEMENTITIOUS LEVELLING COAT with built-in flexibility and waterproofing properties. Ideal for the treatment of repaired concrete and the surrounding areas to give an overall uniform appearance. Tested by Taywood.

PAck Size

  • 12.5Kg

Coverage/Yield

6.24L @1mm

Description

An easy to use CEMENTITIOUS COMPOUND which develops a high strength at an early age for small cosmetic repairs of both insitu and pre cast concrete. Can be colour-blended on site to match substrate.

PAck Size

  • 7.5Kg
  • 25Kg

Coverage/Yield

3.75L 12.5L

Description

Nufins MCI-2020 is A SURFACE APPLIED, MIGRATING CORROSION INHIBITOR designed to penetrate through cementitious materials including concrete, mortar, and limestone. Nufins MCI-2020 migrates in both liquid and vapour phases through the pore structure, forming a protective, molecular layer on embedded reinforcement.

PAck Size

  • 20L
  • 210L

Coverage/Yield

0.3 l/m² (horizontal) 0.6l/m² (vertical)

Description

RAPID SETTING BEDDING MORTAR characterised by its rapid strength development. Complies with HA 104/09 6.1 for Bedding of Chamber and Gully Tops.

PAck Size

  • 25Kg

Coverage/Yield

12L

Description

RAPID SETTING BEDDING MORTAR characterised by its rapid strength development which enables work to be carried out with the minimum of disruption. Ideal for the bedding and raising of manhole frames, fixing of street furniture and as a rapid setting repair mortar. Complies with HD 27/04 3.11N/mm² @ 2 hours.

PAck Size

  • 25Kg

Coverage/Yield

12.5L

Description

STYRENE BUTADIENE RUBBER latex emulsion designed to upgrade the bonding, waterproofing and abrasive qualities of sand cement renders and screeds.

PAck Size

  • 5L
  • 25L
  • 200L

Coverage/Yield

N/A

Description

A cement based polymer modified HIGH BUILD/THIXOTROPIC COMPOUND designed for sealing of tie holes.

PAck Size

  • 1L
  • 4L

Coverage/Yield

1L 4L

Description

Flow-applied, HEAVY DUTY SELF-SMOOTHING SCREED Laid from 5-25mm in one application; providing a smooth, dust free surface. Wearing surface for industrial and fork lift traffic.

PAck Size

  • 5Kg

Coverage/Yield

2.5L

Description

Flow-applied, HEAVY DUTY SELF-SMOOTHING SCREED Laid from 5-25mm in one application; providing a smooth, dust free surface. Wearing surface for industrial and fork lift traffic.

PAck Size

  • 25Kg

Coverage/Yield

14L

Description

Single pack polymer SEALER / PRIMER for use with Nucem HD. Economical in use and requires dilution with clean water only.

PAck Size

  • 5L

Coverage/Yield

50m² per Litre

Description

Shrinkage compensated BEDDING MORTAR, for STONE, GRANITE and CONCRETE elements. Suitable for use on pedestrian and vehicular trafficked areas. Complies with BS7533.

PAck Size

  • 25Kg

Coverage/Yield

13L

Description

Shrinkage compensated, high strength, single pack JOINTING MORTAR used for joint filling paving elements in pedestrian and carriageway situations. Complies with BS7533.

PAck Size

  • 25Kg

Coverage/Yield

13L